This mid frisco mount gas tank will sit up higher on your backbone than the standard tank. These 1.8 gallon gas tanks are top quality, nice thick steel with a center mount American style filler bung that accepts stock style screw in filler cap. Thes tanks feature a single 22mm outside petcock fitting Though the gas cap bung is set up for a vented cap anyway. The tank shells are stamped from 1mm (approx. 19 ga.) steel.
Tanks are pressure tested at the factory, but it is highly recommended you or your painter pressure test it again before painting; it's cheap insurance!
1.8 Gallon Capacity
Right Hand Side Petcock Location
Screwn In style Gas Cap Required